The os4100 is specifically designed to provide temperature compensation data for strain measurements from FBG based strain gages installed on the same structure. Because its installation procedure is similar to the os3100 Optical Strain Gage, it is a convenientchoice for compensation of the os3100...

os4100 Datasheet


Like os500 and os5100, the os5500 is specifically designed to measure and monitoring displacements between two gage points on a specimen surface such as cracks and joints in civil and geotechnical structures. This sensor has a displacements measurements range up to 450mm...

os5500 Datasheet


The os5000 is specifically designed to measure and monitoring displacements between two gage points on a specimen surface such as cracks and joints in civil and geotechnical structures. This sensor has fast and high resolution measurements of displacement with displacements measurements range from 0-12mm...

os5000 Datasheet


Like os500, the os5100 is specifically designed to measure and monitoring displacements between two gage points on a specimen surface such as cracks and joints in civil and geotechnical structures. This sensor has double ended design supports multiplexing of multiple gages on one fiber and has
fast and high resolution measurements of displacement withdisplacements measurements range from 0-50mm...

os5100 Datasheet


The os7100 is a fiber optic accelerometer based on FBG technology.Optimized for large structures and long term measurements, the os7100 measures accelerationsfrom DC up to a few hundred Hertz. This sensor can be attached to a structure using a standard threaded connection, and is available in one,two or three axis configurations. The os7100 can be used for health monitoring of bridges, dams, buildings, tunnels,ships, aircraft, trains, and other complexstructures...

os7100 Datasheet


os7100-Three Axis

Accelerometer Sensors

Inclinometer & Tiltmeter Sensors

Displacement Sensors

Temperature Sensors

GeoDetect is the first system designed specifically for geotechnical applications. The GeoDetect series (GeoDetec, GeoDetect S & GeoDetecS-BR) embodies a geocomposite fabric and fiber optics and uses FBG technology to measure strain and/or temperature in soil structures. This system allows the design professional and owner to understand the performance of their structures and addition providing alerts for negative "geo-events" (subsidence) and other potentially deleterious events. GeoDetec series are ideal for monitoring walls, embankments, slopes, Levees, roads, rails, landfills, pipelines and foundations...

GeoDetect Datasheet

GeoDetect S

GeoDetect  S-BR

SC-01 is a long and very long gauge strain measuring sensor. Offers measuring of average strain between its own anchoring points that can cover measured area from 30cm to 10m. This sensor can be supplied with integrated temperature FBG sensor used for compensating temperature changes during measurement in longitudinal strain profile, crack monitoring and borehole deformations. Principal uses surface-mountable using mounting brackets although it can be​ embedded...

SC-01 Datasheet

ASC-01 is a unique extensometer with several adjacent strain measuring gaugesin one-cable-array design which replaces numbers of individual sensors that would be required to measure all those gauges with complicated cabling installation. Tnis sensor can be used for both embeddable and surface-mountable to measure borehole deformation, longitudinal strain profile and shape deformations...

ASC-01 Datasheet

MS-01 is short gauge mountablestrain sensor. Provides adjustable prestrain setup during installation up to ±5000µɛ. This sensor can be used to strain changes detection, crack monitoring, rebar strain or force monitoring (also embedded in concrete)...

MS-01 Datasheet

ES-01 is short gauge directly embeddable strain sensor into the concrete structures without requiring any further supportive elements. This can be connected in series with other sensors or combined with other temperature sensors to offer temperature compensation strain profile monitoring...

ES-01 Datasheet

The os3610 Surface Mount Strain Sensor measures average strain over the length of the gage while providing integrated temperature compensation. Is intended exclusively for surface mounting. Each end of the os3610 is attached to the structure via rigid brackets that are either welded,bolted, epoxied, or grouted to the surface of a concrete, rock, steel, composite, or other structure...

os3610 Datasheet

​Strain Sensors

The os3600 Embeddable Strain Sensor measures average strain over the length of thegage while providing integrated temperature compensation. The os3600 is intended exclusively for embedding in concrete or rock structures such as bridges, dams, buildings, tunnels and other complex structures...

os3600 Datasheet

The os3200 Non-metallic Optical Strain Gage is designed to make fiber handling easy and sensor installation fast and repeatable. Has a self adhesive backing that holds the sensor body in place and protects the FBG while epoxy is injected. Measures strain on structure surfaces...

OS3200 Datasheet

The os3155 is a rugged strain gage with integrated temperature compensation. Both strain and temperature compensation measurements are based on FBG technology. The design is similar to the os3150. The benefits of this approachinclude both more accurate temperature compensation and lower-cost installation (by reducing the need for additional cables, splices and handling to connect additional temperature gages)... 

os3155 Datasheet

Optimized for outdoor installations on steel structures, the os3150’s stainless steel carrierholds the FBG in tension and protects the fiber during installation.​ For temperature compensation, the os3150 may be connected in series with an FBG temperaturegage. This strain gage can be used to continuous lifetime health monitoring of bridges, dams, buildings, tunnels, ships, aircraft, trains, and other complex structures... 

Oos3150 Datasheet

The os3100’s stainless steel carrier holds the FBG in tension and protects the fiber during installation.​Two packaging options provide for either weld (os3110) or epoxy (os3120) attachment to a structure’s surface.​ This strain gage can be used to continuous lifetime health monitoring of bridges, dams, buildings, tunnels, ships, aircraft, trains, and other complex structures...

os3100 Datasheet


os1000 series are a single FBG centered in a two meter length (os1100) or six meter length (os1200) of polyimide coated optical fiber. It may be used individually or can be spliced into an array of many FBGs to measurement of strains on surface structures, inside of composite or laminates structures, measurement of temperatures, displacements, pressures and accelerations...

os1100 Datasheet

os1200 Datasheet

FBG-TI-310

FBG-IN-320

os7100-Single Axis

os5500

SG-01

SGC-01

os5000

os5100

ACCESSORIES

GeoDetet

os4300

os4400

os4100

os4200

ASC-01

SC-01

ES-01

MS-01

os3600

os3610

os3155

os3200

os1100

os1200

os3100

os3150

​FBG Sensors

SENSORS

SOFTWARE

INSTRUMENTS

SENSORS

Our sensors are manufactured with superior technology of fiber-optic and wireless sensors. Assure the highest degree of measurement precision, long term stability, resolution, and accuracy while offering the benefits of EMI immunity, extended durability, ease of installation, premium performance under harsh environmental conditions and small physical footprint.

The FBG-TI-310 is a tiltmeter sensor built in FBG sensor for temperature compensation. Is designed to perform monitoring long-term measurements for the angular variation of structures during construction and after completetion such as tunnels, dams, adjacent structures due to the construction downtown and road surface. Also it can be used for safety evaluation on adjacent structures when works excavation and stacks the soil...

FBG-TI-310 Datasheet


os4350 - Armored Cable, Flange Mount

os4330 - Non-metallic Epoxy Mount

TP-02 is temperature sensor with ruggedized housing applicable in harsh environments. This can be mounted to the desired surface or embedded into the concrete and connected in series configuration with other sensors by connector or splice connection for temperature compensation of strainsensors...

TP-02 Datasheet


The os4400 Temperature Sensing Cable is a multipoint temperature sensor. Discrete points along a rugged cable are used to simultaneously measure temperature with sub degree Celsius accuracy over a wide range of temperatures. Several os4400 cables can be multiplexed to cover hundreds of sensing points over kilometers of cable runs. This sensor can be used for fire and condition monitoring in rail and highway tunnels, flooding, and performance monitoring for power transmission and other service tunnels and conduits, mine safety monitoring, leak detection and flow assurance for pipelines...

os4400 Datasheet

The os4200 Temperature Probe is a family of gages designed to make fiber handling easy and sensor installation fast and repeatable. It is based on FBG technology. The os4200’s body is a sealed, stainless steel tube that protects the FBG. This sensor makes measurements of absolute temperature on a structure’s surface and measurement of relative temperature for compensation of strain measurements...

os4200 Datasheet


TP-STS-01 is surface temperature sensor that has high temperature measuring range (up to 180°C) segregated from ambient environment and has small dimensions...

TP-STS-01 Datasheet


TP-STS-01

TP-02

The os4300 Non-metallic Temperature Sensor is a family of gages. The os4300’s body is a sealed, alumina ceramic tube that protects the FBG. This sensor makes measurements of absolute temperature on a structure’s surface and measurement of relative temperature for compensation of strain measurements...

os4300 Datasheet


The FBG-IN-320 is a inclinometer sensor built in FBG technology for temperature compensation. Is designed to perform monitoring long-term measurements for slope displacement below the surface of the earth, of structures during construction or after completion of construction, measurements for the slope displacement of adjacent structures due to the construction of downtown and measurements for the angular variation of adjacent structures due to the construction of downtown...

FBG-IN-320 Datasheet


os4310 - Single Ended & Double Ended Sensors​

​Putting The Power Of Monitoring And Safety In Your Hands​